контекстнaя интернет реклaмa

huawei y511 stockrom

huawei y511 stockrom


Take a backup of your parsonal data before flash.
all data is deleted after flash.Whenever a thing is wrong, this
helps to recover the personal data

Huawei Y511-U10V100R001C498B106(SW_S98511B8_V007_M11_HUAWEI_Y511U_MP)

Download Here

Huawei Y511-U30 V100R001C524B104N_Firmware_Malaysia_operatorValue_Android4.2_05021MNB

Download Here

Guide for SP Flash tools :
1. download and extract the stockrom on your computer
2. install all driver for your mobile , and run SP flash tools
3. after run SPflash tools , you load the scatter file from the stockrom folder.
4. connect your phone to the computer via USB cable
5. click on upgrade/download button in the SP flash tools
6. waiting and when Gren ring will appear at the end of successfull flash .
done and goodluck .

Install with SP MDT:

1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it’s in the folder with the rom).
8). Click “Start all”.
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.

huawei y511 stockrom Rating: 4.5 Diposkan Oleh: Quan Pham Van

0 nhận xét:

Post a Comment